“Confidential, Do Not Duplicate without written authorization from NEC.”
6-11
METHOD OF FIRMWARE UPGRADING
4) Connection (Login)
When connection (login) is successful, the software and hardware version info already installed in
“Current Projector Info” is displayed.
10-3. DLP Cinema® Control Program
Preliminary arrangements (Not required if setting is already finished in the PC)
• Make settings for the PC network to the figures specified below.
IP-Address 192. 168. 010. 17
Gateway 192. 168. 010. 17
Subnet Mask 255. 255. 255. 0
1) Start “DLP Cinema® Control Program” from the PC.
Caution) Use the version program attached to the latest release, without fail.
To Next Page
Loading...
