“Confidential, Do Not Duplicate without written authorization from NEC.”
10-2
PACKAGING
Left side
FRONT
Front side
Printed on the seal paper for adhesion
Label (carton) T (24L63921)
(Avoid overlapping on the PP band.)
Label (carton) R (24L63942)
(Avoid overlapping on the PP band.)
Label (carton) L (24L63932)
(Avoid overlapping on the PP band.)
Right side
Front side
FRONT
The required items shall be printed on the barcode serial label (16761791), which shall then be stuck to both
sides of the corrugated cardboard box. It shall be stuck to Label (carton).
(Stuck inside the [ ]) (The contents of printing shall conform to the instructions given by the Production
Enginering Division.)
Packing Details 2.
• Label sticking position (* The front surface is defined as the lens side of the set.)
To Next Page
Loading...
