“Confidential, Do Not Duplicate without written authorization from NEC.”
14-11
REPLACEMENT OF THE LAMP HOUSE AND BULB
15. Disposal procedure
Used lamp bulbs including high-pressurized xenon gas have the risk of a burst. Be sure to break the glass
parts of the bulbs before disposal.
The disposal procedure is described below.
(1) Put a used lamp bulb in the specialized protection case and lock the case without fail.
(2) Put the specialized protection case in the specialized packaging box, and tape it tightly to prevent the
box from opening.
(3) Hold the packaging box at a height of approximately 1 meter horizontally and drop it to the hard floor.
(4) Shake the box to make sure that the lamp bulb is broken.
(5) Dispose of the bulb as industrial waste. In this regard, follow your local rules and regulations as required.
That's all
To Next Page
Loading...
