NEC NEAX 2000 IPS - Page 128

CHAPTER 2 INSTALLATION
– 112 – NWA-008841-001 Rev.5.0
90ch2001.fm
• Connection of AC CORD-B
(1) Connect the AC CORD-B to the CN1 connector on the PZ-PW121/PZ-PW126 card.
(2) Screw the ground cable of the AC CORD-B to the frame ground terminal on the PIM.
Connection of AC CORD-B
CORD BUSH
BASE
TERMINAL BLOCKS
FRONT
PZ-PW121/PZ-PW126
CN1
AC CORD-B
AC CORD-D
TO 120 V/240 V AC POWER SOURCE
POWER CABLE CONNECTION