CHAPTER 1 GENERAL INFORMATION
– 20 – NWA-008841-001 Rev.5.0
90ch1001.fm
Control Card
This table shows the names and functions of each control card.
NOTE: PZ-M537 (EXPMEM) card is not required for the MP (PN-CP24-A/PN-CP24-B/PN-CP24-C/
PN-CP24-D/PN-CP26-A/PN-CP26-B) card.
Control Card Name and Function
Continued on next page
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PN-CP24-A/
PN-CP24-B
MP Main Processor Card
Provides LAN control function, system-based Device Registration
Server (DRS), built-in FP, Virtual FP, built-in OAI, built-in SMDR
on RS-232C, built-in SMDR on IP*, built-in PMS on IP*, Virtual
IPT, Virtual CSH, 33 MHz PCI BUS, Memory (SDRAM 32 MB,
Flash ROM 9 MB), TDSW (1024CH × 1024CH), 16-line CFT, PB
sender, Clock, 2-line PLO (receiver mode/source mode), two RS-
232C ports, 2-line DAT (Recording duration: Maximum 128 sec-
onds), DK, 4-line PB receiver, Modem for remote maintenance
(33.6 Kbps), Music-on-Hold tone, BUS interface. BUS interface
functions as a driver/receiver of various signals, adjusts gate delay
timing and cable delay timing, monitors I/O Bus and PCM BUS.
One card is required per system.
*: Series 3400 software enhancement
PN-CP24-C/
PN-CP24-D
MP Main Processor Card
Provides LAN control function, system-based Device Registration
Server (DRS), built-in FP, Virtual FP, built-in OAI, built-in SMDR
on RS-232C, built-in SMDR on IP*, built-in PMS on IP*, Virtual
IPT, Virtual CSH, 33 MHz PCI BUS, Memory (SDRAM 32 MB,
Flash ROM 9 MB), TDSW (1024CH
×
1024CH), 16-line CFT, PB
sender, Clock, 2-line PLO (receiver mode/source mode), two RS-
232C ports, 2-line DAT (Recording duration: Maximum 128 sec-
onds), DK, 4-line PB receiver, Modem for remote maintenance
(33.6 Kbps), Music-on-Hold tone, BUS interface. BUS interface
functions as a driver/receiver of various signals, adjusts gate delay
timing and cable delay timing, monitors I/O Bus and PCM BUS.
Supports MP Program Download (FTP)**.
Once card is required per system.
* : Series 3400 software enhancement
** : Series 3500 software enhancement
JULY/1/2006
EQUIPMENT NAME AND FUNCTION
To Next Page
Loading...
