NEC NEAX 2000 IPS - Control Card Mounting Conditions

CHAPTER 1 GENERAL INFORMATION
– 48 – NWA-008841-001 Rev.5.0
90ch1001.fm
Control Card Mounting Conditions
(1) Single CPU System
• PN-CP24-A/PN-CP24-B/PN-CP24-C/PN-CP24-D (MP)
Mount the PN-CP24-A/PN-CP24-B/PN-CP24-C/PN-CP24-D card in the MP slot (slot 12) of PIM0.
• PN-CP15 (FP)
When the system is configured with three PIMs or more, mount one PN-CP15 card in the FP slot
(slot 12) of PIM2, PIM4, and PIM6.
When the system is configured with one or two PIMs, the PN-CP15 card needs not to be mounted.
MP/FP Card Mounting Slots
F
P
12
F
P
12
F
P
12
M
P
12
PIM7
PIM6
PIM5
PIM4
PIM3
PIM2
PIM1
PIM0
JULY/1/2006
MOUNTING CONDITIONS OF CIRCUIT CARDS