CHAPTER 1 GENERAL INFORMATION
– 47 – NWA-008841-001 Rev.5.0
90ch1001.fm
Mountable Slots According to Number of Ports
The PIM can mount 8-port or 16-port circuit cards.
Available slots are defined by the number of ports of the circuit card.
* In slot 08-11, 8-port circuit cards are not mountable. The number of physical ports which can be
provided by slot 08-11 depends on the number of ports of the circuit cards mounted in slot 04-07.
NOTE 1: For Backup CPU system, the circuit cards are mounted in slot 08 to 10.
NOTE 2: When PN-4LLCB (LLC) is used for controlling message waiting lamp, the card is to be mounted
in the LT00-LT07 (When PN-4LLCB is not used for controlling message waiting lamp, the card
can be mounted in the LT00-LT11.).
MOUNTING CIRCUIT
CARDS IN SLOT04-07
MOUNTABLE CIRCUIT CARDS IN SLOT08-11
NOTE 1
8-port circuit cards such as;
PN-8COT, PN-8DLC,
PN-8LC, PN-4DAT,
PN-CFTB, PN-2CSI
16-port circuit card;
PN-4CSI
Any application processor cards
4-port circuit cards NOTE 2 4-port line/trunk cards or any application processor cards
00 01 02 03 04 05 06 07 08 09 10 11 12
P
F
T
V
M
8-port or 16-port circuit cards are mountable
4-port circuit cards are mountable
See below.*
MOUNTING CONDITIONS OF CIRCUIT CARDS
To Next Page
Loading...
