EasyManua.ls Logo

NEC NEAX 2000 IPS - Specifications

NEC NEAX 2000 IPS
619 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY INSTRUCTIONS
– 5 – NWA-008841-001 Rev.5.0
90ch0001.fm
(b) Specifications
Specifications of the gas tube arrester to be provided are as follows.
(24) Warning for US and Canada only
PARAMETER SPECIFICATIONS
Transmission bandwidth DC to 2MHz
Transmission loss Less than 0.5dB
Longitudinal balance More than 50dB
Nominal decoupling resistance 1ohm ± 0.5%
Operating voltage DC 60V Max.
Nominal DC spark-over voltage 90V
Impulse spark-over voltage (at 1.2/50µs 6kV) 1500V (at initial max. voltage; 0 to 10µs)
20V (at more than10µs)
Nominal discharge current 100 A (at 10/200µs)
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme a la norme NMB-003 du Canada.

Table of Contents

Other manuals for NEC NEAX 2000 IPS

Related product manuals