NEC NEAX 2000 IPS - Page 135

CHAPTER 2 INSTALLATION
– 119 – NWA-008841-001 Rev.5.0
90ch2001.fm
• Connection of AC CORD-B
(1) Connect the AC CORD-B to the DC INPUT connector on the PZ-PW135 card.
(2) Screw the ground cable of the AC CORD-B to the frame ground terminal on the PIM.
Connection of AC CORD-B
CORD BUSH
BASE
(SN1685
BASEUC)
TERMINAL BLOCKS
FRONT
PZ-PW135
DC INPUT
AC CORD-B
INSTALLATION CABLE
TO –48 V DC POWER SOURCE
POWER CABLE CONNECTION