CHAPTER 2 INSTALLATION
ā 142 ā NWA-008841-001 Rev.5.0
90ch2001.fm
(3) Connect the champ connector of each MDF cable to the LTC connector located on the PIM using the
screws provided, as shown below.
(4) Secure the MDF cables to the PIM using tie wraps.
Cable Running to External MDF
(a) Using cable hole of BASE
Continued on next page
BATTM
PIM2
PIM1
PIM0
FRONT
CHAMP CONNECTOR
LTC CONNECTOR
PIM3
TO MDF
CABLE RUNNING TO MDF
To Next Page
Loading...
