– 192 – NWA-008841-001 Rev.5.0
90ch2002.fm
STEP3: Secure the PZ-M542/PZ-M557 card to the PIM CARD STOPPER with one screw.
NOTE 1: Screw is attached to the PZ-M542/PZ-M557 card.
NOTE 2: Before securing the PZ-M542/PZ-M557 card to the PIM CARD STOPPER, all the cards should
be mounted on the card slots and the PIM CARD STOPPER should be secured with screws. See
“MOUNTING CIRCUIT CARDS”. Page 275
Mounting of PZ-M542/PZ-M557 Card
SCREW
PZ-M542/PZ-M557
CARD STOPPER
Digital Trunk Interface (DTI)
To Next Page
Loading...
