NEC NEAX 2000 IPS - Page 235

– 219 – NWA-008841-001 Rev.5.0
90ch2002.fm
(6) Connection of Recording Equipment
The following equipment is required for using recording function:
• Tape Recorder with MIC and Remote Connections
• Cross Connect Wire
• 8-Core Modular Block (RJ45)
• 8-Core Modular Cable
As shown in the following figure, connect cross connect wire to MIC Jack and Remote Jack, then
connect other end of wire to 8-core modular block. And connect one end of 8-core modular cable to
DESKCON REC connector, connect the other end to 8-core block.
Cable Connection for Recording Equipment
REC(8-Core)
MODULAR
BLOCK(RJ45)
DESKCONSOLE
(Bottomview)
SN716DESKCON
8-core
Modular
Cable
Cross
Connect
Wire
1
MODULAR
BLOCK(RJ45)
TAPERECORDER
MICJack
8-Core
ModularCable
1P
MICJACK
CrossConnectWire
TAPERECORDER
1P
REMOTE
JACK
2
3
4
5
6
7
8
RemoteJack
Page 220
SN716 DESKCON (DLC)