– 236 – NWA-008841-001 Rev.5.0
90ch2002.fm
<Conf. Tone For All Keys>
This item specifies the confirmation tone control for all keys of the SN716 DESKCON.
STEP1: Display Configuration Menu P6. Page 221
STEP2: Press the numeric key 1 (CONF. TONE FOR ALL KEYS).
STEP3: Press the desired numeric key. An asterisk (*) shows the selected number.
1. Confirmation tone is enable for all keys.
2. Confirmation tone is disable for all keys.
3. Confirmation tone is controlled by the system.
STEP4: Press the SRC key. The display returns to Configuration Menu.
STEP5: Press the Answer key to update the configuration data. Page 225
When canceling update, press the Release key.
When returning previous item, press the SRC key.
[CONFIG MENU P6] VER x SRC: prev page
1:
CONF. TONE FOR ALL KEYS
DEST: next page
Release: exit
Answer: update
[CONF. TONE FOR ALL KEYS]
SRC: menu
* 1: ENABLE
2: DISABLE
Default setting:
“1:ENABLE”
3: SYSTEM
[CONFIG MENU P6] VER x SRC: prev page
1:
CONF. TONE FOR ALL KEYS
DEST: next page
Release: exit
Answer: update
SN716 DESKCON (DLC)
To Next Page
Loading...
