– 240 – NWA-008841-001 Rev.5.0
90ch2002.fm
STEP2: Set the switch located inside the console according to the type of headset/handset connected.
Refer to next page. Page 241
Switch Setting on the SN708/709/712/741 ATTCON
• Slide the directory out of the way.
Then insert a flat screw driver’s blade into the notched opening and apply light upward pressure until
the access panel is clear of the front lip. At the same time apply pressure (toward you) at the rear of
the pedestal to move the access panel.
Continued on next page
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
ACCESS PANEL
DIRECTORY
SN708/709/712/741 ATTCON (DLC)
To Next Page
Loading...
