– 270 – NWA-008841-001 Rev.5.0
90ch2002.fm
• Connection via MODEM
When the cable length between the PBX and the terminal is more than 15 m (49.2 ft), MODEMs are
required. Use RS NORM-4S CA-A as shown below. See Page 267 also.
SMDR/PMS/MCI Terminal Connection via MODEMs
NOTE: PMS cannot be used with PN-AP00-D card.
RS0 - RS3
PN-
PBX
(PIM0 - PIM7)
RS NORM-4S CA-A:
4 m (13.1 ft.)
MODEM MODEM
2P
MORE THAN 15 m (49.2 ft.)
MODEM: FULL DUPLEX (4W)
1200 BPS (LEASED TYPE)
INTERFACE CABLE
(FOR STRAIGHT
CONNECTION)
TO RS-232C PORT
RS NORM-4 CA-A/
SMDR0/SMDR1/
PMS/MCI (VMS)
AP00-B/
NOTE
AP00-D
JULY/1/2006
SMDR/PMS/MCI/CIS Printer/Hotel Printer (AP00)
To Next Page
Loading...
