ā 297 ā NWA-008841-001 Rev.5.0
90ch3002.fm
]
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
JP0 (Jumper pin)
For normal operation
(Battery backup ON)
DOWN
Not used
(Battery backup OFF)
JP1 (Jumper pin)
RIGHT
For using external hold tone source
(When Pin Jack on the MP card is in
use)
For using internal hold tone source
(When Merody IC on the MP card is in
use)
Front
UP
Front
LEFT
NOVEMBER/15/2006
PN-CP24-A/PN-CP24-B/PN-CP24-C/PN-CP24-D (MP)
To Next Page
Loading...
