ā 314 ā NWA-008841-001 Rev.5.0
90ch3002.fm
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
SW301 (Dip SW)
1
ON CR Voltage: 75 Vrms
OFF CR Voltage: 90 Vrms
2
ON Frequency: 20 Hz
OFF Frequency: 25 Hz
SW102
PRESS
MOMEN-
TARILY
To start each PIM on battery power
when AC power is not provided
1
2
ONOFF
25 Hz 20 Hz
90 V 75 V
PZ-PW126 (AC/DC PWR)
To Next Page
Loading...
