CHAPTER 1 GENERAL INFORMATION
– 24 – NWA-008841-001 Rev.5.0
90ch1001.fm
Application Processor Card Name and Function
Continued on next page
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PN-30CCTA CCT CCIS (2 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No.7
CCIS.
PN-CFTC CFT 32 Party Conference Trunk Card
Maximum eight cards per system.
PN-CFTC-A CFT 8/32 Party Conference Trunk Card
Maximum eight cards per system.
PN-DAIA-A DAIA T1 Digital Trunk Interface (1.5 Mbps) Card for Remote PIM
Accommodates 24-channel PCM digital lines, and provides Firm-
ware Processor and BUS interface.
One through six cards must be provided at Main Site, which corre-
sponds to the number of Remote Site.
PN-DAIB DAIB T1 Digital Trunk Interface (1.5 Mbps) Card for Remote PIM
Accommodates 24-channel PCM digital lines, and provides Firm-
ware Processor.
One card is required per Remote PIM at Remote Site.
PN-DAIC DAIC T1 Digital Trunk Interface (1.5 Mbps) Channel Expansion Card
Accommodates 24-channel PCM digital lines.
One through twelve cards can be provided at Main Site.
Two cards can be provided at Remote Site.
PN-DAID-A DAID E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines, and provides Firm-
ware Processor and BUS interface.
One through six cards must be provided at Main Site, which corre-
sponds to the number of Remote Site.
PN-DAIE DAIE E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines, and provides Firm-
ware Processor.
One card is required per Remote PIM at Remote Site.
NOVEMBER/15/2006
EQUIPMENT NAME AND FUNCTION
To Next Page
Loading...
