ā 443 ā NWA-008841-001 Rev.5.0
90ch3003.fm
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE 3: When using the firmware program of SC-3591 IPS IPTT PROG-B1 or later for the PN-8IPTA
card, you may set the Auto Negotiation ON/OFF settings by the SW0-3. When using the firm-
ware program of SC-3249 IPS IPTT PROG-A1 for the PN-8IPTA card, Auto Negotiation func-
tion is always set to ON.
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
SW0
(Piano Key SW)
1
ON Not used
For normal operation
2
For normal operation
OFF Not used
3
NOTE 3
ON
Auto Negotiation OFF
(100 Mbps [Full-Duplex] fixed)
Auto Negotiation ON
(Ethernet 10 Mbps/100 Mbps automatic
change)
4
ON AP No. 04-15
OFF AP No. 20-31
4
3
2
1
OFF
ON
OFF
ON
OFF
JULY/1/2006
PN-8IPTA (SIP)
To Next Page
Loading...
