ā 479 ā NWA-008841-001 Rev.5.0
90ch3003.fm
Mounting PZ-M537 Card
When mounting the EXPMEM card on the AP00 card, do the following procedure.
STEP1: Take off three screws from the rear side of EXPMEM support.
NOTE: Supports and screws are attached to the EXPMEM card.
STEP2: Connect the CONNR connector on the EXPMEM card and the CONN connector on the AP00
card.
STEP3: Secure the EXPMEM card to the AP00 card with three screws which have been taken off by
STEP1.
Mounting EXPMEM Card on AP00 Card
SUPPORT
EXPMEM CARD
EXPMEM CARD
CONNR CONNECTOR
AP00 CARD
CONN CONNECTOR
OCTOBER/31/2005
PZ-M537 (EXPMEM)
To Next Page
Loading...
