CHAPTER 1 GENERAL INFORMATION
– 40 – NWA-008841-001 Rev.5.0
90ch1001.fm
Line/Trunk Card Name and Function
Continued on next page
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PZ-24IPLA 24DSP 24-channel DSP Card for 8-channel IP-PAD Card
Provides Packet Assembly/Disassembly to accommodate Legacy
Line/Trunk Interface. And Provides voice compression DSP control
functions such as voice compression control, DTMF relay same as
IP-PAD (PN-8IPLA) card.
Used to expand the IP-PAD channel up to 32-channels.
PZ-8PFTB PFT 8-line Power Failure Transfer Card
To be mounted in PFT slot of PIM.
One card per PIM.
PZ-VM00/
PZ-VM00-M
VM00 4-port Voice Mail Card (NEAXMail AD-8)
One card per system.
Number of ports : 4 ports (Up to 8 ports when PZ-VM01 is
mounted)
Occupies three physical slots width per card.
To be mounted in LT00 slot of PIM.
PZ-VM10-M VM10 4-port Voice Mail Card (NEAXMail AD-8)
One card per system.
Number of ports : 4 ports (Up to 8 ports when PZ-VM01 is
mounted)
Occupies three physical slots width per card.
To be mounted in LT00 slot of PIM.
PZ-VM01 VM01 4-port Voice Mail Extension Card
To be mounted on PZ-VM00/VM00-M.
PZ-VM02
[For North
America/Aus-
tralia]
VM02 This card consists of a digital signal processor for port interface
(4 ports), central processor unit for controlling various data, hard
disk unit to read/write the application software, and an internal
modem (14.4 Kbps) for remote maintenance. Moreover, mounted
into the LT00 slot (for CPU card) of the PIM0. One card per PBX
is available.
JULY/1/2006
EQUIPMENT NAME AND FUNCTION
To Next Page
Loading...
