NEC NEAX 2000 IPS - Page 580

– 564 – NWA-008841-001 Rev.5.0
90ch3004.fm
Switch Settings
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
JP0, 1
(Jumper pin)
UP
When connected to E1 (2 M) Digital
Trunk Interface
DOWN
When connected to T1 (1.5 M) Digital
Trunk Interface
JP2 (Jumper pin)
RIGHT
Line code: B8ZS* is provided
(For T1 interface)
*B8ZS: Bipolar Eight Zero Substitution
LEFT
Line code: B8ZS* is not provide
(For T1 interface)
*B8ZS: Bipolar Eight Zero Substitution
JP3 (Jumper pin)
RIGHT
When connected to E1 (2 M) Digital
Trunk Interface
LEFT
When connected to T1 (1.5 M) Digital
Trunk Interface
JP4 (Jumper pin)
UP
When connected to E1 (2 M) Digital
Trunk Interface
DOWN
When connected to T1 (1.5 M) Digital
Trunk Interface
PN-M10 (M10)