NEC NEAX 2000 IPS - Page 591

– 575 – NWA-008841-001 Rev.5.0
90ch3004.fm
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE 1: Do not turn off the system power and operating power of PN-RTA card while the BUSY lamp is
lit.
NOTE 2: When the power is on, flip the PWRSW switch to UP position (Operating power is off) before
plugging/unplugging the circuit card.
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
SWM
(Piano Key SW)
1
ON Test Mode
For normal operation
2
ON For aging
For normal operation
3 Not used
4
ON Super Reset
For normal operation
4
3
2
1
OFF
ON
OFF
OFF
OFF
OFF
PN-RTA (RTA)