– 601 – NWA-008841-001 Rev.5.0
90ch3004.fm
• DSP Board
The figure in the SWITCH NAME column and the position of in the SETTING POSITION col-
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the
circuit card.
SWITCH NAME
SWITCH
NUMBER
SETTING
POSITION
FUNCTION CHECK
SW5 (Toggle SW)
NOTE
For shut-down (MB on)
DOWN For normal operation (MB off)
SW6
(Dip SW)
1
SW SW
6-1 6-2
OFF OFF Voice Mail started in
direct mode (When
SW4-1 is set to OFF.)
OFF ON Voice Mail started in
modem mode (When
SW4-1 is set to ON.)
2
3 Not used
4 Not used
UP
1
2
3
4
ON
OFF
OFF
OFF
OFF
PZ-VM03-M (VM03)