NEC SL2100 - Page 104

ISSUE 4.0 SL2100
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS 102
3. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12″).
7 - 9.5 mm
(0.28″ - 0.37″)
83.5 mm
(3.287″)
Minimum 10 mm (0.39″)
3 - 4 mm
(0.12″ - 0.16″)
1 - 3 mm
(0.04″ - 0.12″)
Figure 2-89 Wall-Mount Screw Guide
4. Mount the telephone on the wall.
Wall side
Figure 2-90 Mounting the Multiline Telephone
• REMOVE A TRANSPARENT PROTECTION SHEET from the telephone,
when installing the telephone.
Wall-mounting
holes