NEC SL2100 - 5.11.6 Wall-Mounting the IP Multiline Telephone (ITK-8 LCX-1)

ISSUE 4.0 SL2100
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS 125
Raising the Height of the Tilt Legs
1. Turn the terminal over (key side down).
2. Adjust the legs to the desired height (upward to raise the height and downward to lower the
height).
3. Turn the terminal over (key side up).
Lowering the Tile Legs
1. Turn the terminal over (key side down).
2. Adjust the legs to the desired height.
5.11.6 Wall-Mounting the IP Multiline Telephone (ITK-8LCX-1)
Wall mounting of the terminal is installed with an optional Wall Mount Unit.
Required Space
Before drilling, use the template shown in the following figure for spacing requirements.
1.0
4.7 inch
Screw holes
for wall
mounting
0.6
1.2
2.6
3.3
2.4
2.0
1.4
Window for WM-L
Unit
Phone external
shape