EasyManua.ls Logo

NEC SL2100 - SECTION 4 CALLING FEATURES; 4.1 Placing Calls

NEC SL2100
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ISSUE 4.0 SL2100
EQUIPMENT LIST 22
The CPU-C1 provides;
Maximum 8ch or 16ch (V.4.00 or higher) Built-in
VoIP resources
Built-In 4ch VRS/VM (InMail) capability
2 hours VRS/VM (InMail) storage without SD Card
Four clients of Mobile Extension
Maximum Four participants of Web Video Conference
One Voice Prompt of VRS/VM (InMail) as default
- Default Language: US English
One VoIPDB daughter board connector
One Ethernet (100M) port (RJ45)
One EXIFB daughter board connector
One SD Card slot (for expand VRS/VM storage)
IP7WW-EXIFB-C1
Using a Cat5 cable, EXIFB-C1 board mount onto the CPU-
C1 board is individually connected to each EXIFE-C1 board
(on Expansion Chassis)
VRS/VM (InMail) channels expansion (Up to 16ch)
Additional 48 Telephony resources (DTMF/Dial tone/Busy tone/FSK caller-ID receiver/sender)
Support Analog Modem (V.34)
IP7WW-EXIFE-C1
The EXIFE-C1 board is installed into the CPU/EXIFE slot on
the Expansion Chassis.
Additional 32 telephony resources (DTMF/Dial tone/Busy tone/FSK caller-ID receiver/sender) for Expansion
Chassis
One Bus connectors for Main Chassis (RJ61)
2.2 Backup Battery Unit
IP4WW-Battery Box
Connected to each Chassis power supply, the external
backup battery provides DC power in case a loss of AC
power occurs. An optional (locally procured), external battery
source can be used to provide power during a power failure.
Connect this box to the power supply at each Chassis.
Wall/floor-mountable
Backup duration is approximately one hour per chassis.
Battery itself is local procure.
(12 V, 7 AH x 2 pcs of GS Yuasa NP7-12)

Table of Contents

Other manuals for NEC SL2100

Related product manuals