ISSUE 4.0 SL2100
INSTALLING WIRELESS DECT TELEPHONES 157
Figure 2-163 Applying Power to the Charging Unit
Use only the supplied AC adapter for the charging unit.
Route the power cord where it can not create a trip hazard, or where it could
become chafed and create a fire or other electrical hazards.
6.4.5 Mounting the Base to a Standard Wall Plate
The DTZ-8R-1 does not support the Wall Plate mount.
6.4.6 Mounting the Base Directly to the Wall
Before mounting the telephone, consider the following:
• Select a location away from electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
- The location must be near a 120Vac power outlet so that the AC power adapter can reach.
- Also consider proximity to the PBX (key system) so that the telephone line cord will not be
excessively long.
• Make sure the wall material can support the weight of the base unit.
• Use #10 screws with anchoring devices suitable for the wall material where the base unit will be
placed.
To mount the telephone:
To Next Page
Loading...
