ISSUE 4.0 SL2100
INSTALLING WIRELESS DECT TELEPHONES 159
4. Place the base unit on the posts of the wall screws and push down until it is firmly seated.
Figure 2-165 Attaching Base Directly to Wall
5. Plug the other end of the short telephone cord into a telephone wall jack.
6. Plug the AC adapter into a standard 120 Vac wall outlet.
Do not use an outlet controlled by a wall switch.
6.4.7 Attaching and Removing the Belt Clip
A belt clip can be used to attach the handset to a belt or pocket for convenient portability.
To Next Page
Loading...
