82 Using Features of US110
Setup each item according to the following guidelines.
NOTE: If any setting has been made in the previous upload process, it
is displayed as the default value.
Upload settings information
Click [Upload] to upload settings information to the server. Then, common.txt file is
created in the server.
Upload connection list
Click [Upload] to upload the connection list to the server. Then, username.txt file is
created in the server.
– Connect User Name
Enter the user name that is used at logon to Terminal Connection Manager (up to 20
characters).
– Connect Password
Enter the password that is used at logon to Terminal Connection Manager with upper-
or lower-case characters and numeric characters (at least 8 characters and up to 127
characters).
Information of Upload Server
– Protocol
Indicates the protocol to be used for File Upload. Only FTP is available.
– Server Name
Specify the server in which the file is uploaded or its IP address (up to 256 characters).
– Server Relative Path
Specify the relative path name where the file is to be stored (up to 256 characters).
– Use Anonymous
Check to use Anonymous for logging in the server.
– User Name
Specify the user name to be used at login to the server (up to 128 characters).
– Password
Specify the password to be used at login to the server (up to 128 characters).
NOTE: [common] is not allowed for username.
To Next Page
Loading...
