NEC US110 - Problems with Settings Initialization; Problems with Ports Used in US110

128 Maintenance
Problems with Settings Initialization
Screen resolution setting information can not be initialized
→ Screen resolution information is stored in a specific HW area, since it is required
for starting operating system of US110. [Settings Initialization] does not initialize
the screen setting information.
Problems with Ports used in US110
Following are the ports used in US110:
 RDP: TCP 3389
US110 --- (3389) → VPC
 Multimedia Acceleration Feature (MPEG1/2): TCP: 57117, 57118, 57119, 57120
US110 ---- (One from above) → VPC
US110 ← (1 out of 1024 to 5000) --- VPC
 Multimedia Acceleration Feature (WMA/WMV): TCP: 39427, 39428, 49427, 49428
US110 ---- (1 out of above) → VPC
US110 ← (1 out of 1024 to 5000) --- VPC
 Multimedia Acceleration Feature (Flash): TCP: 1334, 1335
US110 ---- (1 from above) → VPC
US110 ← (1 out of 1024 to 5000) --- VPC
 FTP: 20,21
US110 (ANY) → (21) FTP Server
US110 (ANY) ← (20) FTP Server
 HTTP: 80,443
US110 --- (80) → VPC
US110 --- (443) → VPC