Using Features of US110 75
SNTP
Use the SNTP dialog box to connect with SNTP server to synchronize the system clock.
Figure 2-58 SNTP
Setup each item according to the following guidelines.
Server:
Enter the server name with up to 256 characters.
[Synchronize] button
Click [Synchronize] to access the SNTP server to set the current time.
[Done] button
Click [Done] to exit from SNTP.
NOTE: US110 does not retain the system time when it is off-powered.
To set system time of US110 automatically at next startup, use SNTP.
To Next Page
Loading...
