76 Using Features of US110
Update
Use this dialog box to modify network configuration used for update, and to update US110 in
manual mode.
Update
Use this dialog box to update US110.
Figure 2-59 Update
Click [Update] to start updating.
When update starts, the processing status is displayed.
When update completes, a message indicating the processing results is displayed as follows:
Ex. 1) Update successfully completed.
This message appears when the application has been updated.
Ex. 2) Failed to connect with server.
This message appears when update failed due to connection error with the server.
If the registry data or operating system is updated, the US110 is rebooted automatically.
To Next Page
Loading...
