96 Using Features of US110
Logging
Use this dialog box to provide settings for logging and update the log file.
Figure 2-75 Logging
Setup each item according to the following guidelines.
Output Log Level
Select "NONE", "ERROR", or "WARNING" for output log level. The default is "NONE".
Click the [OK] button to set the Output Log Level.
Flash Interval
Select "10 seconds", "30 seconds", "1 minute", "10 minutes", "1 hour", or "Only at
shutdown". Click the [OK] button to set the Flash Interval.
Protocol
The protocol to be used for File Upload is displayed.
Server Name
Enter the server name or IP address with up to 256 characters in which you want to upload
the log file.
Server Relative Path
Enter the relative path name with up to 256 characters for destination directory to store the
log file.
To Next Page
Loading...
