Maintenance 127
Problems with USB Device
The keyboard and mouse are disabled at startup if a printer is connected to US110:
→ When the USB printer is connected to US110, the popup dialog prompting you to
specify device driver may appear at startup of US110. If the USB printer is
connected to the port that has higher priority than those for keyboard and mouse,
the keyboard and mouse are disabled.
Connect the keyboard and mouse to the ports having higher priority than the
printer according to the figure below. (In the figure, (1) shows highest priority, and
(5) shows the lowest priority.)
Front Panel
Rear Panel
Problems with Shutdown Settings
Wake On LAN feature is disabled:
→ If the power supply is interrupted while configuring Wake On LAN (e.g.,
removing the AC adapter or others), Wake on LAN feature is disabled. Restart
US110, then shutdown it to enter the Wake on LAN standby status.
Power consumption while Wake On LAN is in standby status is about 7 W.
(3)
(2)
(4)
(5) (1)
To Next Page
Loading...
