70 Using Features of US110
Server Location
Use the Server Location dialog box to specify the server location and the protocol to be used for the
new ICA entry.
Figure 2-55 Global ICA Client Settings - Server Location
Setup each item according to the following guidelines.
Select the required protocols from the list box.
Specify a group that you want to configure. Select Primary, Backup 1, or Backup 2.
Click [Add]. Add Server Address dialog box opens.
Enter the address of a new Citrix server in the Add Server Address dialog box.
If you have selected TCP+HTTP or SSL/TLS+HTTPS for the protocol, you need to enter
the port number in addition to the server address. After entered, click [OK].
Add or remove the server as needed. Click [OK] to save the new settings.
Click [Rename Group] to add or remove the server group name.
To Next Page
Loading...
