Nederman FlexPAK 800 User Manual

FlexPAK 800/1000
EN
16
1 Preface
Read all product documentaon and product idencaon plate carefully before
installaon, use, and service of this product. Replace documentaon immediately if lost.
Nederman reserves the right, without previous noce, to modify and improve its products
including documentaon.
This product is designed to meet the requirements of relevant EU direcves. To maintain
this status, all installaon, maintenance, and repair is to be done by qualied personnel
using only Nederman original spare parts and accessories. Contact the nearest authorized
distributor or Nederman for advice on technical service and obtaining spare parts. If there
are any damaged or missing parts when the product is delivered, nofy the carrier and the
local Nederman representave immediately.
This manual is supplemented by:
• Installaon and Service Manual.
• PLC Sengs Manual.
2 Safety
This document contains important informaon that is presented as either a warning,
cauon or note. See the following examples:
WARNING! Risk of personal injury.
Warnings indicate a potenal hazard to the health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage.
Cauons indicate a potenal hazard to the product but not to personnel, and how that
hazard may be avoided.
NOTE! Notes contain other informaon that is important for personnel.
3 Descripon
3.1 Funcon
FlexPAK 800/1000 is a complete vacuum unit with a direct driven side channel fan ed as
one unit on a steel frame and a start and control unit with an integrated 24 V transformer.
The unit is controlled by a frequency converter, has automac start/stop, and automac
lter cleaning.
9 Maintenance ...............................................................................................................................................................................31
9.1 Empty the collector bin .......................................................................................................................................... 32
9.2 Filter package ..............................................................................................................................................................32
9.3 Spare parts ....................................................................................................................................................................32
9.4 Recycling .........................................................................................................................................................................33
9.4.1 Environmental informaon .....................................................................................................................33
10 Acronyms and abbreviaons ............................................................................................................................... ...............34

Nederman FlexPAK 800 Specifications

General

Brand	Nederman
Model	FlexPAK 800
Category	Dust Collector
Language	English