Modules & Options
PC Camera 7 - 5
7
PC Camera Driver Installation
1. Press the Fn + F10 key combination to power on the PC Camera module
(click Cancel if you see a “New Hardware Found” message).
2. Make sure the module is powered on, and then insert the Device Drivers &
Utilities + User’s Manual CD-ROM into the CD/DVD drive.
3. Click Install WinXP Drivers (button).
4. Click 10.Install CCD Driver > Yes from the Drivers Installer menu.
5. Choose the language you prefer and click OK.
6. Click Next > Finish to restart the computer.
7. Run the BisonCap application program from the BisonCam shortcut on the
desktop, or from the BisonCam item in the Start > Programs/All Pro-
grams menu (if the hardware is turned off use the Fn + F10 key combina-
tion to turn it on again).
To Next Page
Loading...
General