Intel Video Driver Controls
B - 6 Attaching Other Displays
B
Attaching Other Displays
If you prefer to use a monitor or flat panel display, connect it to the external monitor
port at the rear of the computer.
1. Attach your external monitor to the external monitor port (or TV to the S-Video-Out
jack), and turn it on.
2. Go to the Graphics Properties control panel (see “Intel Graphics Properties”
on page B - 3) and click Display Devices.
3. Click to choose the display option from the Multiple Display menu.
4. Click Apply (and OK to confirm the settings change) and OK (button).
Intel Display Note
Note that the notebook
is the default Primary
display device and may
not be changed.
Figure B - 4
Display Devices
To Next Page
Loading...
General