Upgrading The Computer
Removing the Battery 6 - 3
6
Removing the Battery
If you are confident in undertaking upgrade procedures yourself, for safety reasons
it is best to remove the battery.
1. Turn the computer off, and turn it over.
2. Slide the latch in the direction of the arrow, and hold it in place.
3. Slide the battery in the direction of the arrow .
Warranty Warning
Please check with your
service representative
before undertaking any
upgrade procedures to
find out if this will VOID
your warranty.
1
2
2
1
1
1
Figure 6 - 1
Battery Latch
To Next Page
Loading...
General