System Startup 1 - 5
Quick Start Guide
1
System Startup
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
4. Attach the AC/DC adapter to the DC-In jack on the right of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter (Note: If you have included the Port Replicator in
your purchase option see page 7 - 12).
5. Raise the lid/LCD (you will need to press the LCD latch to release the lid of Model A computers) to a
comfortable viewing angle, and press the power button to turn the computer “on”.
6. Adjust the LCD panel to a comfortable viewing angle.
7. The LED Power & Communication indicators show the power and battery status of the computer, and give
notification of e-mail received.
Figure 1 - 1 - Computer with AC/DC Adapter Plugged-In
Shutdown
Please note that you should always shut your computer down by
choosing the Turn Off Computer command from the Start menu
in Windows. This will help prevent hard disk or system problems.
To Next Page
Loading...
General