Power Management
3-4Power Schemes
3
Power Schemes
You can set your computer to conserve power through individual components by
means of Power Schemes. You can also adjust the settings for each scheme to set
the monitor to turn off after a specified time, and the computer's hard disk motor to
turn off if the hard disk drive has not been accessed for a specified period of time (if
the system reads or writes data, the hard disk motor will be turned back on). The
schemes may also be set to set a specified time for the system to enter Stand by or
Hibernate modes (see “System Power Options” on page 3 - 6).
Resuming
Operation
Press the Sleep/Re-
sume key combination
(Fn + F4), or power but-
ton to resume from Mon-
itor or Hard Disk Stand
by.
Figure 3 - 1
Power Schemes
To Next Page
Loading...
General