Troubleshooting
Operation 8 - 13
8
Operation
Problem Possible Cause - Solution
The system freezes or
the screen goes dark.
The system’s power saving features have timed-out. Use the AC/DC adapter, press the sleep (Fn
+ F4) key combination, or press the power button if no LEDs are lit.
The system never goes
into a power saving
mode.
Power Options features are not enabled. Go to the Windows Power Options menu and enable
the features you prefer (see “System Power Options” on page 3 - 6). Make sure you have
enabled Hibernate mode from the control panel.
To Next Page
Loading...
General