68 | Chapter 2: Configuring System Information
FS728TP Smart Switch Software Administration Manual
MED Details
Capabilities Supported Specifies the supported capabilities that were received in MED TLV from the
device.
Current Capabilities Specifies the advertised capabilities that were received in MED TLV from the
device.
Device Class Displays the LLDP-MED endpoint device class. The possible device classes
are:
• Endpoint Class 1 Indicates a generic endpoint class, offering basic LLDP
services.
• Endpoint Class 2 Indicates a media endpoint class, offering media
streaming capabilities as well as all Class 1 features.
• Endpoint Class 3 Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 switch support
and device information management capabilities.
PoE Device Type Displays the port PoE type. For example, Powered.
PoE Power Source Displays the port's power source.
PoE Power Priority Displays the port's power priority.
PoE Power Value Displays the port's power value.
Hardware Revision Displays the hardware version advertised by the remote device.
Firmware Revision Displays the firmware version advertised by the remote device.
Software Revision Displays the software version advertised by the remote device.
Serial Number Displays the serial number advertised by the remote device.
Model Name Displays the model name advertised by the remote device.
Asset ID Displays the asset ID advertised by the remote device.
Location Information
Civic Displays the physical location, such as the street address, the remote device
has advertised in the location TLV. For example, 123 45th St. E. The field
value length range is 6–160 characters.
Coordinates Displays the location map coordinates the remote device has advertised in
the location TLV, including latitude, longitude and altitude.
ECS ELIN Displays the Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN) the remote device has advertised in the location
TLV. The field range is 10–25.
Unknown Displays unknown location information for the remote device.
Field Description
To Next Page
Loading...
Need help?
General