ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
4-14 Firewall Protection and Content Filtering
1.1 November, 2009
LAN WAN Inbound Rule: Setting Up One-to-One NAT Mapping
If you arrange with your ISP to have more than one public IP address for your use, you can use the
additional public IP addresses to map to servers on your LAN. One of these public IP addresses
will be used as the primary IP address of the VPN firewall. This address will be used to provide
Internet access to your LAN PCs through NAT. The other addresses are available to map to your
servers.
Figure 4-5
To Next Page
Loading...
