NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet Router

ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual
5-10 Virtual Private Networking Using IPsec
1.1 November, 2009
4. Verify the Security Policy settings.
• By default TF1 routers use PFS with Group 2, so we need to click on Security Policy to
make this change on the Client software to match the policy on the router.
• On the left, expand Authentication (Phase 1) and click Proposal 1: no changes are
needed.
• On the left, expand Key Exchange (Phase 2) and click Proposal 1. No changes are
needed.
5. In the upper left of the window, click the disk icon to save the policy.
Figure 5-11