5.
Click the group name for the MAC ACL that you want to set up.
The previous figure shows some examples. Devices in the Available Stations table
are automatically detected by the access point and are common to all MAC ACLs,
which allows you to add a device to more than one MAC ACL. A neighboring station
displays as Neighbor and a connected station displays as connected.
6.
To change the group name, enter a new name in the Group Name field.
The default group names for the eight MAC ACLs are Management, Guest, Guest1,
Custom, Custom 1, Custom 2, Custom 3, and Custom 4.
7. Select the ACL Policy Allow or Deny radio button.
If you select the Allow radio button, a WiFi device for which you place the MAC
address in the ACL is allowed access to the WiFi network, but all other WiFi devices
are denied access to the WiFi network.
If you select the Deny radio button, a WiFi device for which you place the MAC
address in the ACL is denied access to the WiFi network, but all other WiFi devices
are allowed access to the WiFi network.
User Manual112Manage Access and Security
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
