6.
To view more detailed information, select Management > Monitoring > System.
The page shows four sections:
•
System Information section. The following settings are displayed:
- System Name. The access point NetBIOS name.
- System Mode. The access point system mode (AP or Router).
-
Wan MAC Address. The MAC address of the WAN Ethernet port of the access
point.
-
Lan MAC Address. The MAC address of the LAN Ethernet port of the access
point.
-
Wireless MAC Address for 2.4 GHz. The MAC address of 2.4 GHz WiFi
interface (radio) of the access point.
-
Wireless MAC Address for 5 GHz. The MAC address of 5 GHz WiFi interface
(radio) of the access point.
-
Ethernet LLDP. The status of Ethernet LLDP feature (Enabled or Disabled).
-
LLDP Neighbour. The name of the LLDP neighbour, if any.
-
Country / Region. The country or region in which the access point operates
or for which the access point is licensed.
-
Current Firmware Version. The version of the firmware that is running on
the access point.
-
Backup Firmware Version. The version of the backup firmware on the access
point.
- Bootloader Version. The primary bootloader (U-Boot) version that is installed
on the access point.
User Manual194Monitor the Access Point and the
Network
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
