Table 3. Factory default settings (Continued)
Default SettingFeature
WPA2 Personal (which is WPA2-PSK)
WiFi password (network key): sharedsecret
Security
Auto. The available channels depend on the region.RF channel
WLAN settings for an individual WiFi network (SSID or VAP)
Both the 2.4 GHz radio and the 5 GHz radio are enabled.WiFi communication
DisabledClient isolation
EnabledBroadcast SSID
Disabled
Automatic band steering includes automatic 802.11k RRM and automatic 802.11v
WiFi network management.
Band steering
1VLAN ID (for WiFi clients)
WPA2 Personal (which is WPA2-PSK)Network authentication
AESData encryption
sharedsecretPassphrase
Disabled802.11w (PMF)
DisabledURL tracking
None assignedMAC ACL
NoneRate limit
NoneCaptive portal
Basic WiFi settings for all WiFi networks (SSIDs or VAPs)
Both the 2.4 GHz radio and the 5 GHz radio are enabled.Radios
2.4 GHz radio: 11ng mode, which also supports 11b and 11bg
5 GHz radio: 11ac mode, which also support 11a and 11na
WiFi mode
BestMCS index / data rate
Dynamic 20 / 40 MHz for the 2.4 GHz radio
Dynamic 20 / 40 / 80 MHz for the 5 GHz radio
Channel width
Maximum (100%)Output power
AutoGuard interval
AutoChannel
NoneWiFi schedule
User Manual229Factory Default Settings and
Technical Specifications
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual
To Next Page
Loading...
