NETGEAR WAC510 User Manual

(Continued)
CommentsPublish DatePublication
Part Number
We added the following sections:
Safety instructions and warnings on page 17
Enable or disable URL tracking for a WiFi network on page 60
Set a data volume limit for the access point on page 98
Router mode: Specify WAN Point-to-Point Protocol over Ethernet settings on
page 132
Schedule the access point to reboot on page 180
View or download tracked URLs on page 203
View the data volume consumption on page 208
Check the Internet speed on page 216
We made major changes to the following sections:
Set up an open or secure WiFi network on page 45
Disable or enable a WiFi network or set up a WiFi activity schedule on page 52
Register and configure Facebook Wi-Fi for the access point on page 71
Manage the advanced WiFi settings for the radios on page 91
Add a user account on page 117
Disable the DHCP client and configure a LAN or WAN IP address on page 129
Router mode: Disable the DHCP client and specify a fixed WAN IP address on
page 131
Router mode: Enable the DHCP client and let the access point obtain a WAN IP
address on page 136
Perform a ping test on page 214
We made other minor changes and corrections throughout the manual.
July 2018202-11840-04
We added Connect over the Internet using the NETGEAR Insight Cloud portal
on page 27, and, throughout the manual, information about the NETGEAR Insight
Cloud portal.
We made major changes to the following sections:
Top panel with LEDs on page 14
Manage local MAC access control lists on page 110, including Manually set up a
MAC access control List on page 110 and Import an existing MAC access control
list on page 114
Enable or disable inter-VLAN routing on page 157
Insight LED is off on page 220
We made other minor changes and corrections throughout the manual.
The client separation feature is now referred to as the client isolation feature (see
Set up an open or secure WiFi network on page 45 and Enable or disable client
isolation for a WiFi network on page 55)
February 2018202-11840-03
4
Insight Managed Smart Cloud Wireless Access Point WAC510 User Manual

NETGEAR WAC510 Specifications

General

2.4 GHz	Yes
Frequency band	2.4 - 5 GHz
Networking standards	IEEE 802.11ac, IEEE 802.11i, IEEE 802.1x, IEEE 802.3af, IEEE 802.3at
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1200 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Maximum data transfer rate (2.4 GHz)	400 Mbit/s
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	2
Internal	No
Placement	Ceiling, Wall
Product color	White
LED indicators	Link, Network, Power
Antenna gain level (max)	6 dBi
Security algorithms	WPA, WPA2
Service Set Identifier (SSID) features	SSID broadcast on/off
Input current	2.5 A
AC input voltage	12 V
Power consumption (typical)	9.3 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	197.32 mm
Height	37 mm
Weight	555.5 g